D-1 Pull-out anchor and chain from locker and lay-out in yard re-stow after works.
D-2 De-rust chain.
D-3 Calibrate anchor and chain & issue certificate.
D-4 Renew chain stud.
D-5 Reweld loose stud.
D-6 Bail out mud from chain locker.
D-7 Wash down with fresh water chain locker.
D-8 Apply paint/coating to chain locker.
D-9 Remove grating & flooring plate of chain locker.
D-10 Pumping-out of water from the chain locker
D-11 Disconnect/reconnect bitter ends.
D-12 Invert ends of chain.
D-13 Exchange Port & Starboard chains/anchor.
D-14 Renew anchor/chain swivel.
D-15 Apply one (1) coating to chain and anchor.
D-16 Range-out aft anchor and chains and lay-out at yard re-stow after works.
D-17 Free-up frozen swivel.
D-18 Free-up tangled chains.
D-19 Pull-out and reinstall anchor windlass gypsy head.
D-20 Pull-out and reinstall anchor windlass wild cat.
D-21 Pull-out and reinstall anchor windlass brake drum.
D-22 Pull-out and reinstall anchor windlass brake band after renewal of lining.
D-23 Re-align anchor windlass base after steel works including fabrication of shims and base bolts.
D-24 Crop-out and fabrication of anchor windlass base.
D-25 Build-up worn-out section of anchor eye.
D-26 Renewal of anchor shackle.
D-27 Build-up anchor pin and housing.
D-28 Fair-up and align anchor arm.
D-29 Build-up anchor chain guide.
D-30 Build-up anchor wild cat.
D-31 Repair of chain hawse pipe.
D-32 Reverse anchor shackle.
D-33 Renewal of flange to main deck attached to Anchor Chain Pipe.
D-34 Pull-out and re-install Anchor Chain Bitter ends in way of Chain Locker repair.
D-35 Reweld crack portion of hawse pipe.
D-36 Build-up Winch gear.
D-37 Build-up anchor chain guide.
D-38 Renewal of anchor chain eye holder of chain locker.
D-39 Pull-out and re-install Winch gear (Primary) and bring to shop for works.
D-40 Pull-out and install new anchor pin.
D-41 Renew anchor hawse pipe.
D-42 Renew anchor chain pipe.
D-43 Remove and re-installation of bell mouth inway of replating.
| 
